Proportional control angle seat valve
- Home
- Products
- Industrial Valve
- Angle Seat Valve
- Proportional control angle seat valve
- 104 Series Two-piece Pneumatic Proportional Control Angle Seat Valve
-
Working principle
The valve positioner receives a 4-20 mA current signal from the controller or control system, converts it into a gas signal through the processor, controls the valve opening, and cooperates with the valve adjustment cone to achieve fast and accurate flow regulation of the valve.
-
Application range
1.EPS(Expanded Polystyrene) molding machines
2.Dyeing machine , Textile Additive Mixing4.Gas Generator, Air separation machine5.Medical equipment6.Chemical industry7.Disinfection , Hospital Sterilizer8.Water disposal9.Rubber manufacturing machinery10.CIP11.Semiconductor12.Shipbuilding equipment -
Characteristics
1. Easy to adjust and easy to operate;
2. Stable operation;
3. The unique adjustment cone design establishes the linear or proportional relationship between the valve opening and closing stroke and the flow rate, thus achieving accurate and fast flow adjustment.
Technical Parameters
Connection Type: threaded, welded, quick-fit, flanged
Medium Temperature: -10 ° C - +180 ° C (PTFE normal temperature type)
+25°C — +220°C (PTFE high temperature type)
Ambient Temperature: 0 — +60°C
Working Pressure: see the angle seat valve single-acting normally closed valve seat downstream installation selection table
Control Pressure: 4-7bar (58-102psi)
control Power: 24VDC ± 10%
Valve Setting Signal: 0/4-20mA or 0-5/10V
Power Consumption: <5W
Input Signal Impedance: 240Ω for 0/4-20mA signal,
21KΩ when 0-5/10V signal
Analog Output Signal: maximum load 560Ω at 0/4-20mA,
Maximum current 10mA at 0-5/10V
Protection Level: IP65
Leakage Rating: DIN EN 12266 Class A
