Y-type angle seat valve

  • Working principle

    Valve stays closed(open)by spring force in its offwork state.When piston is actuated by compressed air,valve becomes opened(closed).For double acting type,valve is opened and closed by compressed air.

  • Application range

    Brewery

     Textile dyeing

    Air separation

    Pharmaceutical

     Fiilling

     Chemical

    Sterilization

    EPS molding

     Environmental

     other ...

  • Characteristics

    1. The lower sealing structure can reduce the residue and is easy to clean

    2. Large flow, small flow resistance, no water hammer

    3. Y-shaped design, increase flow by 30%

    4. Long service life

    5. Valve stem automatic calibration, self-lubricating, maintenance-free

    6. The cylinder is made of stainless steel, which is more excellent in harsh environments and can rotate 360 °


Technical Parameters

Operating pressure:0-16bar (232psi)

Control pressure: 3-8bar (43.5-116psi)

Control medium: Clean compressed air or neutral gas

Body material: CF8M / CF8

Seal material: PTFE

Actuator material: CF8 (28mm-90mm Actuator), AL (125mm Actuator)

Actuator size: 28mm, 40mm, 50mm, 63mm, 90mm, 125mm

Applicable fluid: water, Alcohol, Oil, Fuel, Steam, Neutral gas or Liquid, Organic solvent, Acid-base solution

Fluid viscosity: Max 600mm²/s

Fluid temperature: -10 ℃ - + 180 ℃ (PTFE normal temperature)

                                +25 ℃ - + 220 ℃ (PTFE high temperature)

Ambient temperature: -10 ℃-+ 80 ℃

Control type: Normally closed, Normally open, Double acting normally closed, Double acting free state

Connection type: Threaded (BSP,BSPT,NPT)/ Socket welding, ASME BPE welding type, ASME BPE quick assembly type

Leakage class: DIN EN 12266 Class A


0086-532- 82515557