Y-type angle seat valve

  • Characteristics

    1. Adopt lower sealing structure, easy to clean and reduce residue;

    2. Y-shaped flow channel design, large flow and small flow resistance, can increase the flow by more than 30%, can be installed in reverse to avoid water hammer

    3. Adjustment cone can be added at the spool to realize manual flow adjustment.


Technical Parameters

Operating pressure: 0-16bar (0-232psi)

Body material: CF8M / CF8

Spool seal: PTFE


Applicable fluid: Water, Alcohol, Oil, Fuel, Steam, Neutral gas or Liquid, Organic solvent, Weak acid or weak alkaline solution

Fluid temperature: -10 ℃ - + 180 ℃ (PTFE normal temperature)

                                 +25 ℃- + 220 ℃ (PTFE high temperature)

Ambient temperature: -10 ℃ to 80 ℃

Fluid viscosity: 600m²/S

Connection type: Threaded (BSP,BSPT,NPT), ASME BPE welding type, ASME BPE quick assembly type

Leakage class: DIN EN 12266 Class A


0086-532- 82515557