Y-type angle seat valve

  • Working principle

    In the non-operating state, the valve is normally closed (open) due to the spring force. When the actuator piston is acted upon by the compressed gas, the valve opens (closes). The double acting form controls the valve switch by means of compressed gas.

  • Application range

    Beer drink

    printing and dyeing

    Air separation

    Pharmaceutical

    Filling

    Chemical industry

    Sterilization

    Foam equipment

    Environmental protection

    other


  • Characteristics

    1, large fiux, low resistance, no water hammer

    2, Y-type design, increase 30% flow

    3, long life

    4, valve stem automatic correction, self-lubricating, maintenance-free

    5. The cylinder is made of stainless steel, which is more excellent in harsh environments and can be rotated 360°.


Technical Parameters

Fluid Pressure: Max 16bar (232psi)

Control Pressure: 3-8bar (43.5-116psi)

Control Fluid: clean compressed air or neutral gas

Body Material: CF8M/CF8

Seals Material: PTFE
Actuator Material: CF8 (40mm-90mm cylinder), AL (90mm-125mm cylinder)

Actuator Size: 40mm, 50mm, 63mm, 90mm, 125mm

Applicable Fluid: water, alcohol, oil, fuel, steam, neutral gas or liquid Organic solvent, acid-base solution

Fluid Viscosity: Max 600mm2/s

Fluid Temperature: -10 ° C - +180 ° C (PTFE normal temperature type)

                                    +25°C — +220°C (PTFE high temperature type)

Ambient Temperature: -10 ° C - +80 ° C

Control Type: single acting normally closed, normally open, double acting normally closed, double acting free state

Connection: threaded, welded, flanged, quick-fit

Leakage rating: DIN EN 12266 Class A


0086-532- 82515557