Advantages
The all stainless steel thermal static steam trap is suitable for heat transfer in tracing pipelines with relatively small condensate flow rates and small heat exchange equipment. It is recommended to install it vertically.
1. Fault Normally Open' feature.
2. The structure is sturdy and lightweight, capable of withstanding superheated steam and water hammer.
3. Automatically adjust the valve opening temperature with a fixed undercooling within the entire working pressure range.
4. Excellent air exhaust performance.
5. Compact structure with large displacement.
6. Maintenance, tenacious and simple.
7. Built-in filter screen with large circulation area.
| Nominal pressure | 3.2MPa |
| Connection | thread |
| Max working pressure PMO | 2.1MPa |
| Max working pressure difference △PMX | 2.1MPa |
| Max operating temperature TMO | 220℃ |
| Four types of bellows | A-Discharge condensate below saturation temperature of 3℃. B-Discharge condensate below saturation temperature of 5℃. C-Discharge condensate below saturation temperature of 15℃. D-Discharge condensate below saturation temperature of 25℃ |
Attention: To avoid abnormal operation, accidents, or personal injury, please do not use this product beyond the specification range.
If the technical standards or regulations of a country or region have special provisions for the above specifications, the product should be used in accordance with local regulations
-
330KB PDF
